Covering Brentwood and nearby
Our coverage of Brentwood takes in the CM13, CM14 and CM15 postcode districts and the neighbouring parts of Essex. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic door refurbishment and we will confirm the arrangements and the price in writing.
Housing providers and managing agents in Brentwood look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Billericay (4.9 miles), Hornchurch (5.9 miles), Romford (6.0 miles), Basildon (7.5 miles), Dagenham (7.7 miles), South Ockendon (7.9 miles).
What to think about for automatic door refurbishment in Brentwood
- After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.
- Exposed entrances in Brentwood suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
- Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
- High street doors in Brentwood often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
- Listed buildings and conservation areas can limit changes to how the frame looks. Refurbishment within the existing frame usually avoids those issues and any need for consent.
Automatic door refurbishment in Brentwood: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic door refurbishment and book a survey in Brentwood.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Book a free refurbishment survey in Brentwood. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.
Automatic door refurbishment in Brentwood: questions
Can you refinish the frame of our door in Brentwood?
Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.
What price range should I expect for automatic door refurbishment in Brentwood?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Brentwood confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is it worth refurbishing an old door at our premises in Brentwood?
If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.
Do you set up the door again after refurbishing it in Brentwood?
Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.
What is the lead time for automatic door refurbishment in Brentwood?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What power supply is needed for automatic door refurbishment in Brentwood?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Brentwood?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.