UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · County Fermanagh

Automatic door refurbishment in Lisnaskea

Broken glass leaf in Lisnaskea? We make it safe, measure for new safety glass and rehang the leaf, then check the track and floor guide for knock-on damage. The survey costs nothing and the quote is fixed.

Town
Lisnaskea
Area
County Fermanagh
Postcodes
BT92
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Lisnaskea and nearby

Requests for automatic door refurbishment in Lisnaskea are handled by us and passed to a specialist engineer working under our management. Coverage includes the BT92 postcode district: town-centre premises, business and retail sites, public buildings and residential streets alike.

GP surgeries, dental practices and pharmacies in Lisnaskea often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Enniskillen (10.2 miles), Irvinestown (16.7 miles), Omagh (24.9 miles).

What to think about for automatic door refurbishment in Lisnaskea

  • High street doors in Lisnaskea often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
  • Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
  • Busy retail units in Lisnaskea may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
  • Floors around the door in Lisnaskea may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
  • Exposed entrances in Lisnaskea suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.

Automatic door refurbishment in Lisnaskea: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in Northern Ireland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for automatic door refurbishment in Lisnaskea, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Send us photos of the door that needs attention in Lisnaskea, and we will arrange a survey at no cost and an itemised quote for the work.

Automatic door refurbishment in Lisnaskea: questions

Do you set up the door again after refurbishing it in Lisnaskea?

Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.

Can you give me a price for automatic door refurbishment in Lisnaskea?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Lisnaskea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Is it worth refurbishing an old door at our premises in Lisnaskea?

If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.

Do you refurbish automatic doors in Lisnaskea?

Yes. Refurbishment work in Lisnaskea is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.

What happens to the old door when a new one is fitted in Lisnaskea?

If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.

Do you service doors in Lisnaskea after installing them?

Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.

What do the building regulations in Northern Ireland say about powered doors?

The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access is in Technical Booklet R, and new entrances need building control approval.

Next step

Automatic door refurbishment in Lisnaskea

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.