Covering Enniskillen and nearby
Our coverage of Enniskillen takes in the BT74 postcode district and the neighbouring parts of County Fermanagh. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic door refurbishment and we will confirm the arrangements and the price in writing.
Doors at quieter sites in Enniskillen and elsewhere in County Fermanagh can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Irvinestown (8.3 miles), Lisnaskea (10.2 miles), Omagh (22.3 miles).
What to think about for automatic door refurbishment in Enniskillen
- High street doors in Enniskillen often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- Exposed entrances in Enniskillen suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
- Office blocks and business parks in Enniskillen with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Care settings in Enniskillen benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.
Automatic door refurbishment in Enniskillen: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in Northern Ireland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.
How it works
- Describe what you need. Whether the job is automatic door refurbishment for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Enniskillen.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Get in touch about automatic door refurbishment in Enniskillen. The work can be planned in stages to keep your entrance open while it is done.
Automatic door refurbishment in Enniskillen: questions
Can you refurbish a door in Enniskillen that another company installed?
Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.
Is there a guide price for automatic door refurbishment in Enniskillen?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Enniskillen confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is it worth refurbishing an old door at our premises in Enniskillen?
If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.
Can refurbishment in Enniskillen help with draughts and heating costs?
New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.
Do you service doors in Enniskillen after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What is the lead time for automatic door refurbishment in Enniskillen?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which marking should a new automatic door in Enniskillen carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.