Automatic Doors in Hyde

Automatic door work in Hyde

Small offices, community centres and village halls around Hyde tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.

Upgrades after an inspection. Work that closes the gaps a safety inspection finds on older doors in England, from extra safety sensors to clearer signage, quoted item by item. See safety and compliance upgrades.
New automatic entrances. Sliding, telescopic, curved, folding and revolving doors for shops, offices and public buildings in Hyde, each starting with a free site survey and a fixed, itemised written quote. See new automatic doors.
Shops and high streets. Automatic doors that hold heat in and let customers with buggies, wheelchairs or full bags walk straight in, including older shopfronts where space is tight. See shops and retail.
Accessible door operators. Low-energy swing operators, push pads and wave switches that make existing public doors easier to open for wheelchair users, people with buggies and anyone carrying shopping. See accessible door operators.

Services in Hyde

New automatic doors

Accessibility and control

Repairs, servicing and safety

Automatic doors and the law in England

Doors on escape routes and fire doors are covered by the Regulatory Reform (Fire Safety) Order 2005. In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Nearby towns (straight-line distance)

Questions from Hyde

What happens to an automatic door in a power cut?

That depends on how the door is set up. Some doors open and stay open, some can be pushed open by hand, and some have a battery that keeps them working for a time or opens them once. Workplace health and safety law expects powered doors to be safe if the power fails. The right setting for a building in Hyde is agreed before installation.

Who actually carries out the work in Hyde?

Specialist automatic door engineers working under our management. We are the contracting party: we arrange the survey or diagnosis, provide the written price, book the work and deal with any follow-up, so you deal with us throughout. We do not have premises in Hyde; engineers travel to each address.

How long does an automatic door installation in Hyde take?

Fitting an operator to an existing door often takes a day, and a complete sliding entrance typically takes one to three days on site once the door has been made. Lead times before that are typically two to eight weeks, depending on the door type. Your quote sets out the expected lead time and the time on site.

Can you fit automatic doors to listed buildings in Hyde?

Often, yes, with the right consent. Changes to a listed building, or to a shopfront in a conservation area, usually need approval from the local planning authority. Slim operators and automating the existing door can reduce the visual impact. Our guide to shop doors, planning and listed buildings explains what to check.

Can you repair an automatic door in Hyde that you did not install?

Yes. Engineers working under our management repair most makes of automatic door, whoever fitted them. Tell us what the door is doing and send a photo of any label on the operator. We agree the visit price in writing before anyone attends, and quote any parts before fitting them.