UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Access control for automatic doors · Greater London

Access control for automatic doors in Chelsea

Adding access control to an automatic door in Chelsea is mostly a wiring and set-up job, but getting it wrong can leave a door locked when the alarm sounds. We follow your fire strategy and test the release every time.

Town
Chelsea
Area
Greater London
Postcodes
SW3, SW10
Guide price
From £795 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Chelsea and nearby

Addresses anywhere in the SW3 and SW10 postcode districts can book access control for automatic doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Chelsea, so the price, the booking and the paperwork all come from one place.

Mixed-use blocks in Chelsea, with shops or offices at ground level and flats above, often have communal entrances run by a managing agent. Doors there have to suit residents, deliveries and visitors, and approval from the freeholder or agent usually comes before work starts.

Nearby towns we also list for access control for automatic doors (straight-line distance): Battersea (1.1 miles), Kensington (1.3 miles), Fulham (1.4 miles), Westminster (1.6 miles), Clapham (2.2 miles), Shepherd's Bush (2.5 miles).

What to think about for access control for automatic doors in Chelsea

  • Think about lost cards and leavers. A system that lets you remove a card centrally is easier to run than a shared keypad code on a busy site.
  • Older automatic doors in Chelsea may not have inputs for access control. The survey checks this, and an older operator may need upgrading or replacing before readers can be linked.
  • Offices on business parks in Chelsea often share entrances between tenants. Agree whose system controls the door, who pays for it and who can add or remove cards.
  • Healthcare sites in Chelsea often control access to wards and staff areas. Think about how visitors, porters and emergency teams will get through at every hour.
  • Decide how the door should behave at each time of day before the survey. Opening hours, cleaning shifts, deliveries and weekend events all affect the schedule the door will follow.

Access control for automatic doors in Chelsea: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £795 ex VAT.

ItemGuide priceNotes
Card or fob reader tied into the door£795 – £2,495per door, ex VAT
Intercom or door entry tie-infrom £495priced on survey, ex VAT
Timed locking and night mode set-upincluded with the aboveprogrammed at commissioning
Electric lock added to an automatic dooron surveydepends on the door and the lock type

Standards and rules in England

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for access control for automatic doors in Chelsea, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Tell us how your door in Chelsea should behave by day and by night, and we will arrange a free survey and a fixed quote.

Access control for automatic doors in Chelsea: questions

Will our door in Chelsea still release when the fire alarm sounds?

On an escape route, yes. Locks are wired to release on the fire alarm signal and, where the fire strategy requires it, the door opens and holds open. We test this with your fire alarm contractor at handover and record the result.

How are prices worked out for access control for automatic doors in Chelsea?

Our guide starts from £795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Chelsea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can our door in Chelsea run on a schedule?

Yes. The door can open freely during opening hours and switch to card or code entry with the lock engaged at night, at weekends and on holiday dates. Staff can override the schedule with a key switch if they need to.

Can you fit fob entry to a residential block in Chelsea?

Yes. We can fit fob readers and video entry to an automatic communal door, set up so residents use fobs and visitors call the flat. Fire alarm and power-loss behaviour are agreed with the managing agent or housing provider before we commission the door.

Do I need permission from a landlord or the council before work in Chelsea?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

Can automatic doors be fitted to a listed building in Chelsea?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Which building regulations apply to a new automatic entrance in Chelsea?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Access control for automatic doors in Chelsea

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.