Covering Bromsgrove and nearby
From shops and surgeries to schools, care homes and private houses, any building in the B60 and B61 postcode districts can be covered for touch-free and push-button activation. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Many buildings in Bromsgrove are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Redditch (5.2 miles), Droitwich Spa (6.1 miles), Halesowen (7.8 miles), Kidderminster (8.8 miles), Stourbridge (9.0 miles), Stourport-on-Severn (9.3 miles).
What to think about for touch-free and push-button activation in Bromsgrove
- Clinics and surgeries in Bromsgrove often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- Car parks and drop-off points in Bromsgrove benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Shops on high streets in Bromsgrove may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
Touch-free and push-button activation in Bromsgrove: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for touch-free and push-button activation in Bromsgrove, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Tell us which doors need better controls at your building in Bromsgrove, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Bromsgrove: questions
Our door in Bromsgrove keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Can you give me a price for touch-free and push-button activation in Bromsgrove?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Bromsgrove confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit door controls for homes in Bromsgrove?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Bromsgrove. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
Can wave switches in Bromsgrove be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
What happens to the old door when a new one is fitted in Bromsgrove?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
How are payments structured for work in Bromsgrove?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Who is responsible for automatic doors on escape routes in Bromsgrove?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.