Covering Birmingham and nearby
Our coverage of Birmingham takes in the B1, B2, B3, B4, B5 and B19 postcode districts and the neighbouring parts of the West Midlands. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about touch-free and push-button activation and we will confirm the arrangements and the price in writing.
Mixed-use buildings in Birmingham, with shops at street level and offices or flats above, often share an entrance or a fire route. Doors in those settings have to suit several users at once, and the managing agent or landlord is usually involved in approving work.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Smethwick (2.9 miles), West Bromwich (4.7 miles), Oldbury (5.1 miles), Shirley (5.9 miles), Rowley Regis (6.1 miles), Halesowen (6.7 miles).
What to think about for touch-free and push-button activation in Birmingham
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Washrooms and accessible toilets in Birmingham need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Car parks and drop-off points in Birmingham benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Listed buildings in Birmingham may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
Touch-free and push-button activation in Birmingham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Birmingham.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us photos of the door and the switch you have now, and we will plan better activation for your building in Birmingham.
Touch-free and push-button activation in Birmingham: questions
How long does it take to fit activation devices in Birmingham?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
What is the guide price for touch-free and push-button activation in Birmingham?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Birmingham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you add touch-free switches to our automatic doors in Birmingham?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
Do you fit door controls for homes in Birmingham?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Birmingham. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
Do I need permission from a landlord or the council before work in Birmingham?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
What happens to the old door when a new one is fitted in Birmingham?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Can a home in Birmingham get help paying for a door opener?
Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.