Covering Swansea and nearby
Homes, businesses and public buildings throughout the SA1, SA2, SA5 and SA7 postcode districts can arrange touch-free and push-button activation with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Swansea for the job rather than working from premises in town.
Large office buildings in Swansea often pair automatic doors with access control, turnstiles and visitor systems. Linking the operator to card readers, intercoms or timers means the entrance opens for staff and visitors at the right times and stays secure out of hours.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Gorseinon (5.4 miles), Neath (6.6 miles), Port Talbot (7.3 miles), Llanelli (10.3 miles), Ammanford (12.0 miles), Maesteg (12.3 miles).
What to think about for touch-free and push-button activation in Swansea
- Car parks and drop-off points in Swansea benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Washrooms and accessible toilets in Swansea need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
Touch-free and push-button activation in Swansea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in Wales
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Swansea and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on touch-free and push-button activation separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ask for a fixed price on touch-free switches, push pads or fobs in Swansea. The survey is free and nothing is fitted until you accept the quote.
Touch-free and push-button activation in Swansea: questions
Can you supply switches for several sites in Swansea?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Is there a guide price for touch-free and push-button activation in Swansea?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Swansea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit door controls for homes in Swansea?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Swansea. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
How long does it take to fit activation devices in Swansea?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
What is the lead time for touch-free and push-button activation in Swansea?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Swansea is agreed before work starts.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.