Covering Formby and nearby
Engineers working under our management travel to addresses across the L37 postcode district for touch-free and push-button activation. There is no depot or showroom in Formby; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Libraries, health centres and council buildings in Formby still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Crosby (5.8 miles), Maghull (6.0 miles), Southport (6.5 miles), Bootle (6.7 miles), Litherland (6.8 miles), Ormskirk (7.7 miles).
What to think about for touch-free and push-button activation in Formby
- Homes in Formby often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Clinics and surgeries in Formby often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
Touch-free and push-button activation in Formby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Formby and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on touch-free and push-button activation separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free visit in Formby and we will recommend activation for each side of each door, then send a written quote.
Touch-free and push-button activation in Formby: questions
Do touch-free switches work in cold or wet weather in Formby?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
Is there a guide price for touch-free and push-button activation in Formby?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Formby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you move a push pad that is in the wrong place at our building in Formby?
Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.
Can you add touch-free switches to our automatic doors in Formby?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
What happens once the installation in Formby is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
How much disruption should we expect while the work is done in Formby?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Do businesses in Formby have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.