Covering Mitcham and nearby
Homes, businesses and public buildings throughout the CR4 postcode district can arrange touch-free and push-button activation with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Mitcham for the job rather than working from premises in town.
Getting a van close to the door is often the hardest part of a London job. Red routes, controlled parking zones and loading rules vary from street to street, so access and parking restrictions are planned into the visit to Mitcham before it is booked.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Morden (1.3 miles), Tooting (1.5 miles), Wimbledon (2.2 miles), Streatham (2.4 miles), Carshalton (2.4 miles), Croydon (3.2 miles).
What to think about for touch-free and push-button activation in Mitcham
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Shops on high streets in Mitcham may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Listed buildings in Mitcham may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
- Car parks and drop-off points in Mitcham benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
Touch-free and push-button activation in Mitcham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Mitcham.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Tell us which doors need better controls at your building in Mitcham, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Mitcham: questions
Do you fit door controls for homes in Mitcham?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Mitcham. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
Can you give me a price for touch-free and push-button activation in Mitcham?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Mitcham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you supply switches for several sites in Mitcham?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Do touch-free switches work in cold or wet weather in Mitcham?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
How are payments structured for work in Mitcham?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
What happens once the installation in Mitcham is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Mitcham?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.