Covering Enfield and nearby
Requests for touch-free and push-button activation in Enfield are handled by us and passed to a specialist engineer working under our management. Coverage includes the EN1 and EN2 postcode districts: town-centre premises, business and retail sites, public buildings and residential streets alike.
Transport hubs, large stations and busy retail streets in and around Enfield put automatic doors under near-constant use. Heavy-duty operators, break-out leaves on escape routes and regular servicing are typical requirements at entrances this busy.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Edmonton (2.1 miles), Tottenham (3.4 miles), Wood Green (3.8 miles), Chingford (3.9 miles), Cheshunt (4.1 miles), Waltham Abbey (4.2 miles).
What to think about for touch-free and push-button activation in Enfield
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Washrooms and accessible toilets in Enfield need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Shops on high streets in Enfield may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Clinics and surgeries in Enfield often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
Touch-free and push-button activation in Enfield: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Enfield.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
For homes in Enfield, ask about fobs, wristbands and wheelchair switches for your door opener. The home survey is free.
Touch-free and push-button activation in Enfield: questions
How long does it take to fit activation devices in Enfield?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
What price range should I expect for touch-free and push-button activation in Enfield?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Enfield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can wave switches in Enfield be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
Do touch-free switches work in cold or wet weather in Enfield?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
What is the lead time for touch-free and push-button activation in Enfield?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Do you service doors in Enfield after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Which building regulations apply to a new automatic entrance in Enfield?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.