Covering Canary Wharf and nearby
Addresses anywhere in the E14 and SE16 postcode districts can book touch-free and push-button activation through us. The engineer who attends works under our management and travels to the site. There is no branch in Canary Wharf, so the price, the booking and the paperwork all come from one place.
Security matters on busy London streets, so entrances in Canary Wharf often need doors that lock firmly at night and work with alarms, shutters or access control. The operator, the locking and any shutter are planned together so they work in the right order.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Canning Town (1.8 miles), Greenwich (1.9 miles), Whitechapel (2.0 miles), Stratford (2.1 miles), Lewisham (2.9 miles), Peckham (3.0 miles).
What to think about for touch-free and push-button activation in Canary Wharf
- Homes in Canary Wharf often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
- Washrooms and accessible toilets in Canary Wharf need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Shops on high streets in Canary Wharf may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Car parks and drop-off points in Canary Wharf benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
Touch-free and push-button activation in Canary Wharf: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Canary Wharf.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For homes in Canary Wharf, ask about fobs, wristbands and wheelchair switches for your door opener. The home survey is free.
Touch-free and push-button activation in Canary Wharf: questions
Do touch-free switches work in cold or wet weather in Canary Wharf?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
What do you charge for touch-free and push-button activation in Canary Wharf?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Canary Wharf confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does it take to fit activation devices in Canary Wharf?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
Our door in Canary Wharf keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
What does the free site survey in Canary Wharf involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for touch-free and push-button activation, with drawings where the door type needs them.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Canary Wharf is agreed before work starts.
Which building regulations apply to a new automatic entrance in Canary Wharf?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.