Covering Bromley and nearby
Engineers working under our management travel to addresses across the BR1 and BR2 postcode districts for touch-free and push-button activation. There is no depot or showroom in Bromley; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Victorian and Georgian terraces are common across London, and converted buildings in Bromley may have steps, narrow hallways or shared front doors. A home door opener or an operator on a communal door has to work within those limits, and the engineer checks what will fit.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Beckenham (1.8 miles), Catford (3.1 miles), Eltham (3.5 miles), Sidcup (4.1 miles), Orpington (4.2 miles), Lewisham (4.2 miles).
What to think about for touch-free and push-button activation in Bromley
- Listed buildings in Bromley may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Car parks and drop-off points in Bromley benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Homes in Bromley often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
- Washrooms and accessible toilets in Bromley need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
Touch-free and push-button activation in Bromley: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bromley.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Send us photos of the door and the switch you have now, and we will plan better activation for your building in Bromley.
Touch-free and push-button activation in Bromley: questions
Our door in Bromley keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Can you give me a price for touch-free and push-button activation in Bromley?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Bromley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you supply switches for several sites in Bromley?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Can wave switches in Bromley be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
Can installation in Bromley happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
What should I send before the survey in Bromley?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for touch-free and push-button activation together more easily.
Who is responsible for automatic doors on escape routes in Bromley?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.