Covering Gloucester and nearby
We do not keep premises in Gloucester. Instead, enquiries about touch-free and push-button activation come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the GL1, GL2 and GL4 postcode districts on a date that suits the site.
Supermarkets and larger stores in and around Gloucester often trade long hours, so work on their entrances is usually planned for early mornings or late evenings. Where a store has more than one entrance, keeping one in use while the other is worked on is part of the plan.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Cheltenham (7.4 miles), Stroud (8.2 miles), Tewkesbury (9.4 miles), Ross-on-Wye (14.2 miles), Cirencester (15.4 miles), Malvern (17.3 miles).
What to think about for touch-free and push-button activation in Gloucester
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Washrooms and accessible toilets in Gloucester need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Shops on high streets in Gloucester may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
Touch-free and push-button activation in Gloucester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Gloucester.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Tell us which doors need better controls at your building in Gloucester, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Gloucester: questions
Our door in Gloucester keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Is there a guide price for touch-free and push-button activation in Gloucester?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Gloucester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit door controls for homes in Gloucester?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Gloucester. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
How long does it take to fit activation devices in Gloucester?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
What power supply is needed for touch-free and push-button activation in Gloucester?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What should I send before the survey in Gloucester?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for touch-free and push-button activation together more easily.
Do businesses in Gloucester have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.