Covering Bedminster and nearby
We cover the whole of the BS3 postcode district, along with nearby towns in the Bristol area. You book each visit for touch-free and push-button activation directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
In Bedminster, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Bristol (1.2 miles), Clifton (1.7 miles), Kingswood (4.2 miles), Fishponds (4.5 miles), Keynsham (4.9 miles), Nailsea (6.7 miles).
What to think about for touch-free and push-button activation in Bedminster
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- Washrooms and accessible toilets in Bedminster need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
- Listed buildings in Bedminster may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
Touch-free and push-button activation in Bedminster: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bedminster.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Ask for a fixed price on touch-free switches, push pads or fobs in Bedminster. The survey is free and nothing is fitted until you accept the quote.
Touch-free and push-button activation in Bedminster: questions
Can you supply switches for several sites in Bedminster?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
What do you charge for touch-free and push-button activation in Bedminster?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Bedminster confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you move a push pad that is in the wrong place at our building in Bedminster?
Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.
Can wave switches in Bedminster be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
What happens once the installation in Bedminster is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do I need permission from a landlord or the council before work in Bedminster?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Do businesses in Bedminster have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.