Covering Bedworth and nearby
We do not keep premises in Bedworth. Instead, enquiries about telescopic sliding doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the CV12 postcode district on a date that suits the site.
GP surgeries, dental practices and pharmacies in Bedworth often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Nuneaton (3.1 miles), Coventry (5.3 miles), Hinckley (5.7 miles), Kenilworth (10.2 miles), Rugby (11.4 miles), Leamington Spa (13.6 miles).
What to think about for telescopic sliding doors in Bedworth
- Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
- Shop units in Bedworth that trade late or open early may want installation outside trading hours. Early starts and weekend work can usually be arranged and are shown as a separate line in the quote.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- Entrances used by ambulances and patient transport in Bedworth benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
- Care homes and supported living buildings in Bedworth may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
Telescopic sliding doors in Bedworth: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bedworth.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For beds, trolleys or wheelchairs that need more room at your entrance in Bedworth, send us the details and we will plan a wider doorway.
Telescopic sliding doors in Bedworth: questions
How much wider will our entrance in Bedworth be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Bedworth shows the exact clear width before you commit.
What do you charge for telescopic sliding doors in Bedworth?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Bedworth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit telescopic sliding doors in Bedworth?
Yes. We arrange supply and installation in Bedworth and the rest of Warwickshire. Specialist automatic door engineers working under our management carry out the survey and the fitting, and we stay the contracting party throughout, so one company is responsible for the drawing, the quote, the installation and the handover paperwork.
Is the telescopic door survey in Bedworth really free?
Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Bedworth is agreed before work starts.
What should I send before the survey in Bedworth?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for telescopic sliding doors together more easily.
Which building regulations apply to a new automatic entrance in Bedworth?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.