Covering Pontypridd and nearby
For telescopic sliding doors, coverage around Pontypridd is set by postcode and includes the CF37 postcode district, as well as nearby addresses in Mid Glamorgan. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Older shopfronts are common in market towns, and some in Pontypridd may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Porth (2.7 miles), Tonyrefail (4.0 miles), Caerphilly (5.7 miles), Mountain Ash (5.9 miles), Bargoed (7.3 miles), Blackwood (7.3 miles).
What to think about for telescopic sliding doors in Pontypridd
- Entrances across Mid Glamorgan that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
- Care homes and supported living buildings in Pontypridd may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- A telescopic header is deeper than a standard one. In older buildings in Pontypridd with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
- Measure the widest thing that has to pass through, whether that is a hospital bed, a mobility scooter or a cage of stock. The clear opening of a telescopic door is chosen from that figure, not from the size of the old doorway.
Telescopic sliding doors in Pontypridd: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Pontypridd.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free site survey in Pontypridd, and an engineer will measure the opening and send a drawing with a fixed, itemised quote for telescopic sliding doors.
Telescopic sliding doors in Pontypridd: questions
Do we need to close our building in Pontypridd while the door is fitted?
Usually not for long. Most telescopic entrances take one to two days on site, and the opening can be secured overnight. Where the entrance is the only way in, we plan the work around your hours, use another entrance if there is one, or work early or at weekends, with any extra cost shown in the quote.
What price range should I expect for telescopic sliding doors in Pontypridd?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Pontypridd confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can our existing sliding door in Pontypridd be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
How much wider will our entrance in Pontypridd be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Pontypridd shows the exact clear width before you commit.
What should I send before the survey in Pontypridd?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for telescopic sliding doors together more easily.
What power supply is needed for telescopic sliding doors in Pontypridd?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Pontypridd?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.