Covering Milford Haven and nearby
From shops and surgeries to schools, care homes and private houses, any building in the SA73 postcode district can be covered for telescopic sliding doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Care homes in and around Milford Haven often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Pembroke Dock (4.3 miles), Haverfordwest (6.7 miles).
What to think about for telescopic sliding doors in Milford Haven
- Entrances across Dyfed that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
- If the entrance is on an escape route, ask your fire risk assessor what the door must do before ordering. Break-out telescopic leaves have to be chosen at the start, because they cannot be added afterwards.
- Medical centres in Milford Haven often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
- Hospital and supermarket entrances in Milford Haven that run for long hours put more wear on the extra rollers and belts of a telescopic door. Plan a servicing arrangement from the start rather than waiting for the first fault.
- Measure the widest thing that has to pass through, whether that is a hospital bed, a mobility scooter or a cage of stock. The clear opening of a telescopic door is chosen from that figure, not from the size of the old doorway.
Telescopic sliding doors in Milford Haven: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for telescopic sliding doors and book a survey in Milford Haven.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Book a free site survey in Milford Haven, and an engineer will measure the opening and send a drawing with a fixed, itemised quote for telescopic sliding doors.
Telescopic sliding doors in Milford Haven: questions
How much wider will our entrance in Milford Haven be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Milford Haven shows the exact clear width before you commit.
What price range should I expect for telescopic sliding doors in Milford Haven?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Milford Haven confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you look after the door in Milford Haven once it is installed?
Yes. We can quote planned servicing for the new door, with each visit priced in writing beforehand and the interval set by how heavily the door is used and the manufacturer's instructions. Busy entrances such as hospitals and supermarkets are usually serviced more often than quieter offices.
Can our existing sliding door in Milford Haven be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What power supply is needed for telescopic sliding doors in Milford Haven?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
How are payments structured for work in Milford Haven?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Do businesses in Milford Haven have to fit automatic doors?
There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.