Covering Portishead and nearby
Coverage for sensor upgrades and replacement runs across the BS20 postcode district and out into the surrounding parts of Somerset. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
GP surgeries, dental practices and pharmacies in Portishead often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Nailsea (3.5 miles), Clevedon (4.7 miles), Clifton (6.6 miles), Caldicot (7.2 miles), Bristol (7.7 miles), Bedminster (7.8 miles).
What to think about for sensor upgrades and replacement in Portishead
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- After a near miss at a door in Portishead, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Portishead so the zones can be set for the new surface.
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
- Swing doors in narrow corridors need sensors on the leaf to protect people on both sides. The engineer checks the swing path and any walls or fittings close by.
Sensor upgrades and replacement in Portishead: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Send a photo of the door and sensor at your building in Portishead, and we will confirm the visit price and the likely sensor before booking an engineer.
Sensor upgrades and replacement in Portishead: questions
Can you price new sensors for my door in Portishead from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Can you give me a price for sensor upgrades and replacement in Portishead?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Portishead, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you replace automatic door sensors in Portishead?
Yes. Sensor replacement and upgrades in Portishead are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.
Will you record the sensor settings for our building in Portishead?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
Can visits in Portishead be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
Can you price a repair in Portishead from photos?
Sometimes. Clear photos of the door, the operator cover and any label showing the make and model, plus a description of what the door is doing, can let us price a likely repair before a visit. Where the cause is not obvious, we agree a diagnostic visit price in writing first and quote the repair afterwards.
Which building regulations apply to a new automatic entrance in Portishead?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.