Covering Tyldesley and nearby
If your building is in Tyldesley, or anywhere in the M29 postcode district, we can arrange sensor upgrades and replacement. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Parking on a busy high street can be tight. When work is booked in Tyldesley, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Atherton (1.3 miles), Leigh (2.5 miles), Walkden (2.8 miles), Westhoughton (3.4 miles), Farnworth (3.7 miles), Swinton (4.9 miles).
What to think about for sensor upgrades and replacement in Tyldesley
- Sites in Tyldesley that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
- Shopping parades and older shopfronts in Tyldesley sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Tyldesley so the zones can be set for the new surface.
- After a near miss at a door in Tyldesley, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
Sensor upgrades and replacement in Tyldesley: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
Ask for a price on new safety or activation sensors in Tyldesley. Each one is set up for the door's hazard zones and tested before the engineer leaves.
Sensor upgrades and replacement in Tyldesley: questions
Can a risk assessment in Tyldesley tell us which sensors we need?
Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.
What price range should I expect for sensor upgrades and replacement in Tyldesley?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Tyldesley, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do engineers carry sensors for doors in Tyldesley?
Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.
Will you record the sensor settings for our building in Tyldesley?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
How soon can an engineer get to Tyldesley?
We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.
What happens during a visit in Tyldesley?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
Do businesses in Tyldesley have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.