UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Cumbria

Sensor upgrades and replacement in Whitehaven

Shops, surgeries and offices in Whitehaven rely on sensors that open the door in good time and keep people safe in the doorway. When they wear out, replacements are matched to the door's controller and set for the way people approach.

Town
Whitehaven
Area
Cumbria
Postcodes
CA28
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Whitehaven and nearby

If your building is in Whitehaven, or anywhere in the CA28 postcode district, we can arrange sensor upgrades and replacement. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Many buildings in Whitehaven are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Workington (6.7 miles).

What to think about for sensor upgrades and replacement in Whitehaven

  • Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
  • Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
  • Sites in Whitehaven that open early or close late may want sensor work done outside trading hours. Tell us the quieter times when you book the visit.
  • Entrances facing busy roads in Whitehaven can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
  • Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.

Sensor upgrades and replacement in Whitehaven: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Report the fault or service. Let us know whether the door has failed, is behaving oddly or is simply due a service or safety inspection. A short video of the problem helps the engineer prepare for the visit.
  2. Agree the price first. Before anyone travels to Whitehaven, the visit price is set out in writing. It is based on the door type, the work requested and the location, so you know the cost in advance.
  3. Diagnose, repair, test. On site, the engineer finds the cause and puts it right where the parts are to hand, or completes the planned service. Sensors, safety functions and emergency behaviour are checked before the door returns to use.
  4. Paperwork and next steps. A written record of the visit is left with you or sent afterwards. If parts must be ordered or more work is advisable, it is quoted separately and only goes ahead once you accept.

Send a photo of the door and sensor at your building in Whitehaven, and we will confirm the visit price and the likely sensor before booking an engineer.

Sensor upgrades and replacement in Whitehaven: questions

Do engineers carry sensors for doors in Whitehaven?

Engineers carry common combined and safety sensors, so many replacements can be fitted at the first visit. Light curtains and specialist sensors are ordered once the door is identified, with delivery typically 1 to 2 weeks. Photos in advance help us bring the right part first time.

Can you give me a price for sensor upgrades and replacement in Whitehaven?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Whitehaven, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Can you upgrade sensors on an old door in Whitehaven?

Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.

Can you price new sensors for my door in Whitehaven from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

How soon can an engineer get to Whitehaven?

We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.

Can visits in Whitehaven be arranged outside working hours?

Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.

Do businesses in Whitehaven have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Sensor upgrades and replacement in Whitehaven

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.