UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · Berkshire

Sensor upgrades and replacement in Maidenhead

We fit new sensors to sliding, swing, folding and revolving doors in Maidenhead and other parts of England. The work is carried out by specialist engineers working under our management, with the price agreed beforehand and each sensor tested with a test body.

Town
Maidenhead
Area
Berkshire
Postcodes
SL6
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Maidenhead and nearby

We do not keep premises in Maidenhead. Instead, enquiries about sensor upgrades and replacement come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the SL6 postcode district on a date that suits the site.

Housing providers and managing agents in Maidenhead look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Marlow (4.0 miles), Slough (5.4 miles), Windsor (5.8 miles), High Wycombe (7.5 miles), Bracknell (7.7 miles), Gerrards Cross (8.3 miles).

What to think about for sensor upgrades and replacement in Maidenhead

  • Entrances facing busy roads in Maidenhead can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
  • Care settings in Maidenhead often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.
  • Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
  • Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Maidenhead so the zones can be set for the new surface.
  • After a near miss at a door in Maidenhead, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.

Sensor upgrades and replacement in Maidenhead: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in England

No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

How it works

  1. Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
  2. Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
  3. On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
  4. Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.

Get your door detecting people properly again. Contact us about sensor replacement in Maidenhead, with the visit cost confirmed before anyone attends.

Sensor upgrades and replacement in Maidenhead: questions

Can you upgrade sensors on an old door in Maidenhead?

Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.

How much should I budget for sensor upgrades and replacement in Maidenhead?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Maidenhead, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Our door in Maidenhead closes on people. Is that a sensor fault?

It is likely, and the door should be treated as unsafe. Switch it to a safe mode, such as manual or open, and keep people away from the leaves. Tell us it is unsafe and we will give you the earliest visit we can offer, then the engineer will check the safety sensors and their zones.

Can you price new sensors for my door in Maidenhead from photos?

Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.

How soon can an engineer get to Maidenhead?

We do not promise response times. When you book, we give you the earliest date we can offer and confirm it once the price is agreed. If the door is unsafe in the meantime, it is usually best to switch it off or set it to a safe mode, put up a sign and keep people clear of it.

How is the visit price set for work in Maidenhead?

We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.

Do businesses in Maidenhead have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Sensor upgrades and replacement in Maidenhead

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.