Covering Herne Bay and nearby
From shops and surgeries to schools, care homes and private houses, any building in the CT6 postcode district can be covered for safety inspections and risk assessments. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Libraries, health centres and council buildings in Herne Bay still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Whitstable (4.5 miles), Canterbury (6.8 miles), Faversham (11.1 miles), Margate (11.1 miles), Ramsgate (12.8 miles), Broadstairs (13.6 miles).
What to think about for safety inspections and risk assessments in Herne Bay
- Retail entrances in Herne Bay with heavy footfall can have sensors knocked out of alignment over time. The inspection checks that detection still covers the full closing edge.
- If the use of a building has changed, for example a unit in Herne Bay that has become a clinic or a gym, the door's original set-up may no longer suit its users.
- Older shopfronts and listed buildings in Herne Bay may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
- Insurers sometimes ask for inspection reports at renewal. Booking the inspection well before the renewal date gives you time to act on any high-priority findings first.
- Public buildings in Herne Bay, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
Safety inspections and risk assessments in Herne Bay: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for safety inspections and risk assessments and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
Start with a clear picture of your automatic doors in Herne Bay. Arrange an inspection and receive ranked findings you can plan and budget around.
Safety inspections and risk assessments in Herne Bay: questions
Can you inspect all the doors on our site in Herne Bay in one visit?
Usually, yes. A whole-site inspection covers every automatic door in one visit and one report, with each door's findings ranked so you can compare priorities across the site. Larger sites may need more than one day, which we agree with you when the inspection is priced.
Is there a guide price for safety inspections and risk assessments in Herne Bay?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Herne Bay, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
How often should doors in Herne Bay be risk assessed?
There is no set legal frequency. Most owners assess each door once, then repeat the assessment when the door is altered, when the people using it change or after an incident. In between, regular servicing keeps the safety functions checked, which in our view should happen at least once a year.
Can an inspection in Herne Bay be combined with a service?
Yes, and it often makes sense. The engineer services the door, then carries out the risk assessment while on site, which saves a second visit. The combined price is agreed in writing before the visit, and you receive both the service record and the inspection report.
What should I tell you when reporting a fault in Herne Bay?
The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.
How is the visit price set for work in Herne Bay?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
Do businesses in Herne Bay have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.