Covering Putney and nearby
Addresses anywhere in the SW15 postcode district can book safety inspections and risk assessments through us. The engineer who attends works under our management and travels to the site. There is no branch in Putney, so the price, the booking and the paperwork all come from one place.
Space for materials and tools is limited at many addresses in Putney, especially on narrow or pedestrianised streets in Greater London. Larger door sets are delivered for the time of fitting, and access and parking restrictions are planned into the visit.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Wandsworth (0.5 miles), Fulham (1.6 miles), Hammersmith (2.3 miles), Wimbledon (2.7 miles), Chiswick (2.8 miles), Chelsea (2.8 miles).
What to think about for safety inspections and risk assessments in Putney
- Older shopfronts and listed buildings in Putney may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
- Power failure behaviour is easy to overlook. The inspection tests what the door does when the mains supply or battery fails, which matters most on escape routes.
- Insurers sometimes ask for inspection reports at renewal. Booking the inspection well before the renewal date gives you time to act on any high-priority findings first.
- Doors on escape routes must let people out safely during a fire or evacuation. The inspection checks break-out, power-failure opening or manual release, as the fire strategy requires.
- Public buildings in Putney, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
Safety inspections and risk assessments in Putney: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in England
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Explain the problem. Whether the door is stuck, slow, noisy or due its next check, a short description and a few photos tell us which kind of visit to book for safety inspections and risk assessments and what to bring.
- Visit cost agreed. You get the visit price in writing before we book the engineer. There are no hidden extras: parts and further work are always quoted separately and in advance.
- Engineer on site. The engineer inspects the operator, sensors, tracks and leaves, carries out the repair or service, and runs the door through its safety tests before it goes back into use.
- Follow-up quoted. You are sent a record of the visit. If something else needs attention, we quote it in writing; for doors on a service plan, the next visit date is noted on the record.
Start with a clear picture of your automatic doors in Putney. Arrange an inspection and receive ranked findings you can plan and budget around.
Safety inspections and risk assessments in Putney: questions
Do you carry out automatic door safety inspections in Putney?
Yes. We organise the inspection and issue the report, and the assessment in Putney is carried out by a specialist engineer under our management. Each door is assessed on site against BS EN 16005 hazard zones, its safety sensors are tested and you receive a written report with ranked findings. The inspection price is agreed in writing before the visit.
Can you give me a price for safety inspections and risk assessments in Putney?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Putney, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do we have to use you for the upgrades the inspection recommends in Putney?
No. The report is yours, and any competent installer can carry out the work. If you want us to do it, each upgrade is quoted separately and itemised, so you can phase the work and start with the high-priority items.
Our insurer in Putney has asked for a risk assessment. Is this what they mean?
Most likely. Insurers usually want a documented, site-specific risk assessment of the door by a competent person, along with service records. Check their exact wording and send it to us. Our report covers the door's hazard zones, test results and recommended actions, which is what most insurers expect to see.
Can you take over servicing of doors in Putney from another company?
Yes. Send us the door details and, if you have them, previous service records or inspection reports. The first visit gives a baseline for each door, and its price is agreed in writing beforehand. From then on, records continue in one consistent format, whichever company looked after the doors before.
What if a door in Putney is found to be unsafe?
The engineer explains the problem and, where needed, leaves the door in a safe state, for example switched off or set so it cannot trap or strike anyone. You receive a written note of the issue. The repair or upgrade that would put it right is quoted before any further work is carried out.
Do businesses in Putney have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.