Covering Wrexham and nearby
We cover the whole of the LL13 postcode district, along with nearby towns in Clwyd. You book each visit for safety inspections and risk assessments directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Weather matters for entrances that face open car parks, which is common on retail and business parks around Wrexham and elsewhere in Clwyd. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.
Nearby towns we also list for safety inspections and risk assessments (straight-line distance): Rhosllannerchrugog (3.8 miles), Buckley (9.1 miles), Mold (10.4 miles), Chester (10.8 miles), Connah's Quay (11.1 miles), Oswestry (13.0 miles).
What to think about for safety inspections and risk assessments in Wrexham
- Care homes and hospitals in Wrexham have users who move slowly or unpredictably. The inspection pays close attention to sensor coverage and door speeds where frail or confused people pass through.
- Schools and nurseries need particular care with finger traps at hinges and beside side screens, because children are more likely to put their hands into gaps.
- Retail entrances in Wrexham with heavy footfall can have sensors knocked out of alignment over time. The inspection checks that detection still covers the full closing edge.
- Older shopfronts and listed buildings in Wrexham may have narrow side screens and tight gaps that were thought acceptable when fitted. The report weighs what can reasonably be improved.
- Public buildings in Wrexham, such as libraries and leisure centres, often have several doors of different ages. A whole-site inspection puts every door into one ranked report.
Safety inspections and risk assessments in Wrexham: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £125 to £250 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Safety inspection and risk assessment, existing door | £125 – £250 | per door, written report, ex VAT |
| Inspection added to a service visit | reduced | quoted with the service |
| Upgrades found by the inspection | quoted separately | see safety and compliance upgrades |
The inspection price is agreed in writing before the visit. Any upgrades the report recommends are quoted separately so you can plan them.
Standards and rules in Wales
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Wrexham and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Book an automatic door safety inspection in Wrexham. Tell us how many doors you have and how they are used, and we will confirm the price in writing.
Safety inspections and risk assessments in Wrexham: questions
Our insurer in Wrexham has asked for a risk assessment. Is this what they mean?
Most likely. Insurers usually want a documented, site-specific risk assessment of the door by a competent person, along with service records. Check their exact wording and send it to us. Our report covers the door's hazard zones, test results and recommended actions, which is what most insurers expect to see.
What will safety inspections and risk assessments in Wrexham cost?
Our guide is £125 to £250 excluding VAT (per door), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Wrexham, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can an inspection in Wrexham be combined with a service?
Yes, and it often makes sense. The engineer services the door, then carries out the risk assessment while on site, which saves a second visit. The combined price is agreed in writing before the visit, and you receive both the service record and the inspection report.
Do we have to use you for the upgrades the inspection recommends in Wrexham?
No. The report is yours, and any competent installer can carry out the work. If you want us to do it, each upgrade is quoted separately and itemised, so you can phase the work and start with the high-priority items.
What should I tell you when reporting a fault in Wrexham?
The address, the type of door, what it is doing or not doing, when the problem started and whether it is safe to use. A photo of the operator label showing the make, and a short video of the fault, help a great deal. With that, we can agree the visit price in writing and send an engineer with the right parts where possible.
What happens during a visit in Wrexham?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
Who is responsible for automatic doors on escape routes in Wrexham?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.