Covering Keighley and nearby
We do not keep premises in Keighley. Instead, enquiries about revolving doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the BD21 and BD22 postcode districts on a date that suits the site.
Around Keighley there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for revolving doors (straight-line distance): Bingley (3.1 miles), Shipley (6.2 miles), Guiseley (7.9 miles), Bradford (8.1 miles), Yeadon (8.9 miles), Colne (10.7 miles).
What to think about for revolving doors in Keighley
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Some visitors to buildings in Keighley find revolving doors hard to use. A slow-speed button, clear signs and staff who can direct people to the pass door all help.
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Keighley, with clear signs.
- Automatic revolving doors need power to the canopy and links to the fire alarm and access control. Plan cable routes before ceilings are closed in.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
Revolving doors in Keighley: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Keighley.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free survey in Keighley to compare manual and automatic revolving doors, with drawings and one fixed, itemised quote.
Revolving doors in Keighley: questions
Do you install revolving doors in Keighley?
Yes. We arrange manual and automatic revolving doors, with their accessible pass doors, for buildings in Keighley and across West Yorkshire. Specialist automatic door engineers working under our management carry out the survey, installation and commissioning, and we are the contracting party throughout.
What is the guide price for revolving doors in Keighley?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Keighley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a revolving door project in Keighley take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Who services a revolving door in Keighley after installation?
We can, with each visit priced in writing before an engineer attends. Revolving doors should have their safety sensors, stop buttons and wing edges checked by a trained engineer at least once a year, and busy entrances usually need more frequent visits. Staff should also make simple daily checks and keep a record.
What power supply is needed for revolving doors in Keighley?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Can automatic doors be fitted to a listed building in Keighley?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Keighley?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.