Covering Gorseinon and nearby
Engineers working under our management travel to addresses across the SA4 postcode district for revolving doors. There is no depot or showroom in Gorseinon; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Many buildings in Gorseinon are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for revolving doors (straight-line distance): Llanelli (5.2 miles), Swansea (5.4 miles), Ammanford (8.8 miles), Neath (10.2 miles), Port Talbot (12.4 miles), Maesteg (17.0 miles).
What to think about for revolving doors in Gorseinon
- Busy reception areas in Gorseinon may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Tall buildings in Gorseinon can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- Hotel entrances in Gorseinon see guests with large cases and families with pushchairs. A larger three-wing automatic door and a clearly signed pass door keep the flow moving.
Revolving doors in Gorseinon: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in Wales
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Gorseinon and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Tell us about your entrance in Gorseinon, its size and how busy it gets, and we will arrange a free survey for a revolving door and pass door.
Revolving doors in Gorseinon: questions
How long does a revolving door project in Gorseinon take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Is there a guide price for revolving doors in Gorseinon?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Gorseinon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Should we choose manual or automatic for our building in Gorseinon?
Manual doors suit smaller entrances with steady traffic and are simpler to maintain. Automatic doors suit busier entrances and visitors with luggage, and add sensors, stop buttons and a slow-speed mode. We explain the difference at the survey and recommend the type that fits how your entrance is used.
Is the survey for a revolving door in Gorseinon free?
Yes. For a new revolving door and pass door, the survey costs nothing and carries no obligation. We look at the space, structure, floor, traffic and fire strategy, then send drawings and a fixed, itemised written quote. Each item is listed separately, which makes it easy to compare with other quotes.
What happens once the installation in Gorseinon is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What is the lead time for revolving doors in Gorseinon?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Do businesses in Gorseinon have to fit automatic doors?
There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.