Covering Kirkby and nearby
Sites across the L32 and L33 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Kirkby for revolving doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Libraries, health centres and council buildings in Kirkby still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for revolving doors (straight-line distance): Maghull (3.1 miles), Litherland (4.4 miles), Prescot (5.2 miles), Bootle (5.2 miles), Huyton (5.3 miles), Crosby (5.8 miles).
What to think about for revolving doors in Kirkby
- Hotel entrances in Kirkby see guests with large cases and families with pushchairs. A larger three-wing automatic door and a clearly signed pass door keep the flow moving.
- Night security needs thought. Decide whether the wings will lock across the drum or a night shield is needed, and how the pass door and any shutters will be secured.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Planned servicing is essential on revolving doors because wing edges, stop buttons and sensors protect people on every turn. Budget for regular visits from the start, with each visit priced in writing.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
Revolving doors in Kirkby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Kirkby.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Send photos and any drawings of the entrance in Kirkby, and we will come back with options for a revolving door and an accessible pass door.
Revolving doors in Kirkby: questions
Can our reception in Kirkby stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
What will revolving doors in Kirkby cost?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Kirkby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a revolving door in Kirkby work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
How long does a revolving door project in Kirkby take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Do you service doors in Kirkby after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What should I send before the survey in Kirkby?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for revolving doors together more easily.
Who is responsible for automatic doors on escape routes in Kirkby?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.