Covering Blackwood and nearby
Homes, businesses and public buildings throughout the NP12 postcode district can arrange revolving doors with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Blackwood for the job rather than working from premises in town.
In Blackwood, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for revolving doors (straight-line distance): Bargoed (1.5 miles), Abertillery (5.3 miles), Risca (6.2 miles), Caerphilly (6.5 miles), Pontypridd (7.3 miles), Pontypool (7.4 miles).
What to think about for revolving doors in Blackwood
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Blackwood, with clear signs.
- Tall buildings in Blackwood can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- Busy reception areas in Blackwood may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- Listed buildings and conservation areas in Blackwood may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
- Some visitors to buildings in Blackwood find revolving doors hard to use. A slow-speed button, clear signs and staff who can direct people to the pass door all help.
Revolving doors in Blackwood: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Blackwood and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
To cut draughts at a busy entrance in Blackwood, talk to us about revolving doors. The survey is free and there is no obligation.
Revolving doors in Blackwood: questions
How long does a revolving door project in Blackwood take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
What price range should I expect for revolving doors in Blackwood?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Blackwood confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the survey for a revolving door in Blackwood free?
Yes. For a new revolving door and pass door, the survey costs nothing and carries no obligation. We look at the space, structure, floor, traffic and fire strategy, then send drawings and a fixed, itemised written quote. Each item is listed separately, which makes it easy to compare with other quotes.
Should we choose manual or automatic for our building in Blackwood?
Manual doors suit smaller entrances with steady traffic and are simpler to maintain. Automatic doors suit busier entrances and visitors with luggage, and add sensors, stop buttons and a slow-speed mode. We explain the difference at the survey and recommend the type that fits how your entrance is used.
Do you service doors in Blackwood after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What do you need from us for parking and access in Blackwood?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Who is responsible for automatic doors on escape routes in Blackwood?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.