Coverage across the Glasgow area
For revolving doors anywhere in the Glasgow area, you deal with one contracting party and one written price. We organise the visit, brief the engineer, who works under our management, and keep the paperwork together afterwards. Below you will find the towns we list in this part of Scotland, 5 in all; if your address sits outside them, the arrangements are exactly the same.
Towns listed in the Glasgow area: Glasgow, Newton Mearns, Barrhead, Giffnock, Clarkston.
What to think about for revolving doors in the Glasgow area
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Tall buildings in the Glasgow area can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- Listed buildings and conservation areas in the Glasgow area may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
- Planned servicing is essential on revolving doors because wing edges, stop buttons and sensors protect people on every turn. Budget for regular visits from the start, with each visit priced in writing.
- Busy reception areas in the Glasgow area may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
Revolving doors in the Glasgow area: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in Scotland
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In Scotland, fire safety regulations say sliding or revolving doors must not be used for exits specifically intended as emergency exits, and Scottish guidance allows automatic and revolving doors on an escape route only where they fail safely to outward opening, or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in the Glasgow area and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send photos and any drawings of the entrance in the Glasgow area, and we will come back with options for a revolving door and an accessible pass door.
Revolving doors in the Glasgow area: questions
Can our reception in the Glasgow area stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
How are prices worked out for revolving doors in the Glasgow area?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in the Glasgow area confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a revolving door project in the Glasgow area take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Should we choose manual or automatic for our building in the Glasgow area?
Manual doors suit smaller entrances with steady traffic and are simpler to maintain. Automatic doors suit busier entrances and visitors with luggage, and add sensors, stop buttons and a slow-speed mode. We explain the difference at the survey and recommend the type that fits how your entrance is used.
What happens once the installation in the Glasgow area is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What do you need from us for parking and access in the Glasgow area?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Do businesses in the Glasgow area have to fit automatic doors?
No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.