Covering Alfreton and nearby
We do not keep premises in Alfreton. Instead, enquiries about revolving doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the DE55 postcode district on a date that suits the site.
Many buildings in Alfreton are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for revolving doors (straight-line distance): Ripley (4.5 miles), Sutton-in-Ashfield (5.4 miles), Kirkby-in-Ashfield (5.8 miles), Heanor (5.9 miles), Belper (6.5 miles), Eastwood (7.6 miles).
What to think about for revolving doors in Alfreton
- Night security needs thought. Decide whether the wings will lock across the drum or a night shield is needed, and how the pass door and any shutters will be secured.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Busy reception areas in Alfreton may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- The fire strategy decides how people will escape. Agree with your fire risk assessor where the pass door and other exits will be before the revolving door is designed.
- Listed buildings and conservation areas in Alfreton may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
Revolving doors in Alfreton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Alfreton and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Get a guide figure from the price tool, then let us survey your building in Alfreton and fix the price in writing.
Revolving doors in Alfreton: questions
Who services a revolving door in Alfreton after installation?
We can, with each visit priced in writing before an engineer attends. Revolving doors should have their safety sensors, stop buttons and wing edges checked by a trained engineer at least once a year, and busy entrances usually need more frequent visits. Staff should also make simple daily checks and keep a record.
What price range should I expect for revolving doors in Alfreton?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Alfreton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does a revolving door project in Alfreton take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
Do you install revolving doors in Alfreton?
Yes. We arrange manual and automatic revolving doors, with their accessible pass doors, for buildings in Alfreton and across Derbyshire. Specialist automatic door engineers working under our management carry out the survey, installation and commissioning, and we are the contracting party throughout.
What is the lead time for revolving doors in Alfreton?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Can automatic doors be fitted to a listed building in Alfreton?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Do businesses in Alfreton have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.