Covering Irvine and nearby
If your building is in Irvine, or anywhere in the KA11 and KA12 postcode districts, we can arrange revolving doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Small offices, community centres and village halls around Irvine tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for revolving doors (straight-line distance): Kilwinning (3.1 miles), Stevenston (4.1 miles), Saltcoats (5.2 miles), Troon (5.2 miles), Kilmarnock (6.2 miles), Ardrossan (6.3 miles).
What to think about for revolving doors in Irvine
- Busy reception areas in Irvine may want to keep people moving during installation week. A second entrance, temporary signs and staged work all help visitors find their way in.
- Planned servicing is essential on revolving doors because wing edges, stop buttons and sensors protect people on every turn. Budget for regular visits from the start, with each visit priced in writing.
- Tall buildings in Irvine can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
- A revolving door needs a flat, level floor and often a recess for the bottom bearing and mat. Check whether the existing slab can be cut, or whether the floor needs building up.
- Listed buildings and conservation areas in Irvine may need consent for a revolving door, especially if it projects or changes the façade. Drawings and finish samples help the planning authority.
Revolving doors in Irvine: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in Scotland
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
Building regulations guidance treats revolving doors as not accessible on their own, so an accessible powered swing or sliding door should be provided alongside. In Scotland, fire safety regulations say sliding or revolving doors must not be used for exits specifically intended as emergency exits, and Scottish guidance allows automatic and revolving doors on an escape route only where they fail safely to outward opening, or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Irvine and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on revolving doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Get a guide figure from the price tool, then let us survey your building in Irvine and fix the price in writing.
Revolving doors in Irvine: questions
How long does a revolving door project in Irvine take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
How much should I budget for revolving doors in Irvine?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Irvine confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can our reception in Irvine stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
Will a revolving door in Irvine work with our fire alarm?
It can. An automatic revolving door can be linked to the fire alarm so it stops, slows or folds as the fire strategy requires, and the pass door can be set to open. Your alarm engineer usually makes the panel connection, and the quote shows who is responsible for each part.
What should I send before the survey in Irvine?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for revolving doors together more easily.
Do I need permission from a landlord or the council before work in Irvine?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Do businesses in Irvine have to fit automatic doors?
No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.