Covering Kendal and nearby
Engineers working under our management travel to addresses across the LA9 postcode district for drive unit replacement. There is no depot or showroom in Kendal; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Many buildings in Kendal are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for drive unit replacement (straight-line distance): Morecambe (18.4 miles), Lancaster (19.5 miles), Heysham (20.4 miles), Barrow-in-Furness (24.5 miles), Fleetwood (29.7 miles).
What to think about for drive unit replacement in Kendal
- Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
- If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.
- Hospitals and care homes in Kendal may need an alternative entrance during the changeover. Plan signs and step-free access for wheelchair users before work starts.
- Doors linked to the fire alarm or access control in Kendal need those links rewired to the new controller. Let us know which systems connect to the door.
- Listed buildings and conservation areas in Kendal make it attractive to keep the existing frame. A new operator inside the existing header changes little that can be seen.
Drive unit replacement in Kendal: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| New drive unit on an existing automatic sliding door | £1,995 – £3,995 | existing leaves kept, installed, ex VAT |
| New operator on an existing automatic swing door | £1,795 – £3,995 | installed, ex VAT |
| Sensors replaced at the same time | £195 – £495 | per sensor, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Kendal and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on drive unit replacement separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Tired of repeat breakdowns at your entrance in Kendal? Ask us to compare a new operator with a new door, so you can choose with both prices in front of you.
Drive unit replacement in Kendal: questions
Can you fit a new operator to a door another company installed in Kendal?
Yes. We replace drive units on doors whoever fitted them. The survey identifies the existing header, leaves and track, and adapter plates usually let a new drive unit from one of the major European operator brands fit without changing the frame.
How much should I budget for drive unit replacement in Kendal?
Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Kendal confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the replacement in Kendal include a service plan?
It can. After the changeover we recommend a service interval based on how heavily the door is used, and a service contract can be set up with a written record of each visit. Servicing is priced separately and agreed in writing before any visit takes place.
Do you replace automatic door drive units in Kendal?
Yes. We are the contracting party for drive unit replacements in Kendal, and the survey and changeover are carried out by specialist engineers we manage. The survey is free and checks that the frame and leaves are worth keeping. You then receive a fixed, itemised quote for the new operator, sensors and any other parts the door needs.
How much disruption should we expect while the work is done in Kendal?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
How do you make sure the door works for disabled visitors in Kendal?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Do businesses in Kendal have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.