UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Drive unit replacement · Ayrshire

Drive unit replacement in Stevenston

A new drive unit fitted to an existing door in Stevenston comes with new sensors where needed, a set-up tested with reference to BS EN 16005 and the conformity paperwork for the finished door, all priced on a fixed quote.

Town
Stevenston
Area
Ayrshire
Postcodes
KA20
Guide price
Typically £1,995 to £3,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Stevenston and nearby

Coverage for drive unit replacement runs across the KA20 postcode district and out into the surrounding parts of Ayrshire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Small offices, community centres and village halls around Stevenston tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.

Nearby towns we also list for drive unit replacement (straight-line distance): Saltcoats (1.3 miles), Kilwinning (2.1 miles), Ardrossan (2.2 miles), Irvine (4.1 miles), Troon (7.5 miles), Kilmarnock (10.2 miles).

What to think about for drive unit replacement in Stevenston

  • Business parks and office blocks in Stevenston with several identical doors can replace operators in phases, keeping at least one entrance open at all times.
  • Heavy glass leaves need an operator rated for their weight. The survey records the size and glass type of each leaf so the right drive unit is specified.
  • Battery backup is easier to add with a new drive unit. It lets the door open or close safely in a power cut, which matters most on escape routes.
  • Check the power supply. A dedicated fused spur and isolator near the door is usually needed, and older installations sometimes need electrical work before the new operator goes in.
  • If the door is on an escape route, the new drive unit must be set up to open, break out or be openable by hand, as the building's fire strategy requires.

Drive unit replacement in Stevenston: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,995 to £3,995 ex VAT.

ItemGuide priceNotes
New drive unit on an existing automatic sliding door£1,995 – £3,995existing leaves kept, installed, ex VAT
New operator on an existing automatic swing door£1,795 – £3,995installed, ex VAT
Sensors replaced at the same time£195 – £495per sensor, ex VAT

Standards and rules in Scotland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Stevenston.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Tired of repeat breakdowns at your entrance in Stevenston? Ask us to compare a new operator with a new door, so you can choose with both prices in front of you.

Drive unit replacement in Stevenston: questions

What if the frame of our door in Stevenston is not worth keeping?

Then we will tell you. Damaged or corroded frames, glass that is not safety glass, or an opening that is too narrow for the people using it are all reasons to choose a new door instead. We can quote both options so you can compare them side by side.

What is the guide price for drive unit replacement in Stevenston?

Our guide is £1,995 to £3,995 excluding VAT (per door), the same guide prices we use across the UK. The free site survey in Stevenston confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Do you provide paperwork for the converted door in Stevenston?

Yes. When we fit a new drive unit we prepare the paperwork for the finished door, including the risk assessment, Declaration of Conformity and user instructions, and hand it over with the test results and settings. It belongs with your building records.

How long will our entrance in Stevenston be closed for the changeover?

A standard sliding door changeover typically takes a day, and a swing operator often less. The work can be scheduled early, after closing or at a weekend so it causes less disruption. Your quote shows the planned date and how long the entrance will be out of use.

How are payments structured for work in Stevenston?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

What should I send before the survey in Stevenston?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for drive unit replacement together more easily.

Do businesses in Stevenston have to fit automatic doors?

No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.

Next step

Drive unit replacement in Stevenston

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.