Covering Horsham and nearby
Engineers working under our management travel to addresses across the RH12 postcode district for frameless glass automatic doors. There is no depot or showroom in Horsham; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Around Horsham there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Crawley (7.2 miles), Horley (10.6 miles), Haywards Heath (10.8 miles), Burgess Hill (11.1 miles), Dorking (11.7 miles), Reigate (13.1 miles).
What to think about for frameless glass automatic doors in Horsham
- Cleaning staff at busy venues in Horsham should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
- Power has to reach the operator above the door. In glass partitions there may be nowhere to hide a cable, so plan the route through the ceiling or a slim trunking from the start.
- Glass partitions in office buildings across West Sussex are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
- Showrooms in Horsham with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
Frameless glass automatic doors in Horsham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Horsham.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free survey in Horsham and get honest advice on whether a frameless door suits your entrance, plus a fixed written quote.
Frameless glass automatic doors in Horsham: questions
How long does fitting take in Horsham?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
What do you charge for frameless glass automatic doors in Horsham?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Horsham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a frameless door suit our street entrance in Horsham?
It depends on exposure. Sheltered entrances, recessed doorways and doors behind a canopy usually suit frameless glass well. A door facing straight onto a windy street may suffer from draughts and noise. We will give you an honest view at the survey and, where needed, suggest a framed door or a frameless inner door in a lobby.
What should we do if the frameless door in Horsham is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
How much disruption should we expect while the work is done in Horsham?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What should I send before the survey in Horsham?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for frameless glass automatic doors together more easily.
Who is responsible for automatic doors on escape routes in Horsham?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.