Covering Doncaster and nearby
Our coverage of Doncaster takes in the DN1, DN2 and DN4 postcode districts and the neighbouring parts of South Yorkshire. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about frameless glass automatic doors and we will confirm the arrangements and the price in writing.
Housing providers and managing agents in Doncaster look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Maltby (7.9 miles), South Elmsall (8.0 miles), Thorne (9.2 miles), Rawmarsh (9.8 miles), Rotherham (11.3 miles), Pontefract (13.8 miles).
What to think about for frameless glass automatic doors in Doncaster
- Clear glass is easy to walk into. Plan manifestation at the outset, whether frosted bands or a pattern based on your logo, rather than adding stickers after the door is fitted.
- Glass partitions in office buildings across South Yorkshire are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
- Showrooms in Doncaster with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Hotels and restaurants in Doncaster often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
- Cleaning staff at busy venues in Doncaster should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
Frameless glass automatic doors in Doncaster: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Doncaster.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For an all-glass entrance in Doncaster that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Doncaster: questions
Do you fit frameless glass automatic doors in Doncaster?
Yes. We arrange supply and installation in Doncaster and throughout South Yorkshire, with specialist automatic door engineers working under our management carrying out the survey and fitting. We are the contracting party, so one company is responsible for the glass, the operator, the installation and the paperwork at handover.
How are prices worked out for frameless glass automatic doors in Doncaster?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Doncaster confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What should we do if the frameless door in Doncaster is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
Is the survey for a frameless door in Doncaster free?
Yes. For a new frameless automatic door, the survey is free and you are under no obligation. The engineer measures the opening, checks the structure above and the floor below, discusses glass and fittings, and you then receive a drawing and a fixed, itemised written quote.
Can automatic doors be fitted to a listed building in Doncaster?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What happens once the installation in Doncaster is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do businesses in Doncaster have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.