Covering Frome and nearby
We cover the whole of the BA11 postcode district, along with nearby towns in Somerset. You book each visit for frameless glass automatic doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Parking on a busy high street can be tight. When work is booked in Frome, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Warminster (6.4 miles), Trowbridge (8.0 miles), Bath (10.3 miles), Melksham (12.7 miles), Keynsham (14.9 miles), Kingswood (17.5 miles).
What to think about for frameless glass automatic doors in Frome
- Listed interiors and heritage buildings in Frome sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
- Showrooms in Frome with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Cleaning staff at busy venues in Frome should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
- Power has to reach the operator above the door. In glass partitions there may be nowhere to hide a cable, so plan the route through the ceiling or a slim trunking from the start.
- The header needs a rigid fixing. In modern offices in Frome with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
Frameless glass automatic doors in Frome: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Describe what you need. Whether the job is frameless glass automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Frome.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
For an all-glass entrance in Frome that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Frome: questions
Do we need building approval for a frameless door in Frome?
Replacing a door like for like does not always need approval, but new entrances and wider building work can. Building regulations guidance on access to buildings applies to new buildings and to building work on existing ones, and the details differ in each UK nation. Your local building control or building standards service can confirm what applies.
What is the guide price for frameless glass automatic doors in Frome?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Frome confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a frameless door in Frome be connected to our access control?
Yes. The operator can be linked to card readers, fob readers, keypads, intercoms or a timer, so the door opens freely in working hours and only for authorised people at other times. Tell us what you already have at the survey and the quote will set out the interface work.
Can a frameless door in Frome match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
Do I need permission from a landlord or the council before work in Frome?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Can automatic doors be fitted to a listed building in Frome?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Frome?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.