Covering Kirkwall and nearby
Addresses anywhere in the KW15 postcode district can book frameless glass automatic doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Kirkwall, so the price, the booking and the paperwork all come from one place.
Island addresses such as Kirkwall need more planning than the mainland. Photos, measurements and door details are gathered in advance, so that a survey and a later installation, or a repair visit, can each be done in as few trips as possible.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Stromness (12.1 miles).
What to think about for frameless glass automatic doors in Kirkwall
- Street-facing doors in Kirkwall that take the full force of wind and rain may be better as framed sliding doors. Frameless leaves have small gaps that let draughts and noise through.
- The header needs a rigid fixing. In modern offices in Kirkwall with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
- Listed interiors and heritage buildings in Kirkwall sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
- Laminated glass is worth considering for ground-floor doors. It stays in place if broken, which keeps the building secure until a replacement leaf can be made.
- Glass partitions in office buildings across Orkney, Shetland and the Western Isles are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
Frameless glass automatic doors in Kirkwall: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. For island addresses the survey is still free; travel and accommodation for the installation itself are shown as a separate line in the quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in Scotland
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Kirkwall and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on frameless glass automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Talk to us about frameless glass doors for your premises in Kirkwall. The survey costs nothing and you decide afterwards whether to go ahead.
Frameless glass automatic doors in Kirkwall: questions
Can a frameless door in Kirkwall match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
Can you give me a price for frameless glass automatic doors in Kirkwall?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Kirkwall confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit frameless glass automatic doors in Kirkwall?
Yes. We arrange supply and installation in Kirkwall and throughout Orkney, Shetland and the Western Isles, with specialist automatic door engineers working under our management carrying out the survey and fitting. We are the contracting party, so one company is responsible for the glass, the operator, the installation and the paperwork at handover.
What should we do if the frameless door in Kirkwall is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
How much disruption should we expect while the work is done in Kirkwall?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What happens to the old door when a new one is fitted in Kirkwall?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Is a building warrant needed for a new automatic entrance in Kirkwall?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.