Covering Ashford and nearby
We do not keep premises in Ashford. Instead, enquiries about frameless glass automatic doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the TN23 and TN24 postcode districts on a date that suits the site.
Around Ashford there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Faversham (11.6 miles), Canterbury (12.8 miles), Folkestone (13.5 miles), Sittingbourne (14.8 miles), Whitstable (16.2 miles), Maidstone (17.5 miles).
What to think about for frameless glass automatic doors in Ashford
- Hotels and restaurants in Ashford often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
- Laminated glass is worth considering for ground-floor doors. It stays in place if broken, which keeps the building secure until a replacement leaf can be made.
- Showrooms in Ashford with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Cleaning staff at busy venues in Ashford should use non-abrasive products on frameless doors, keep the floor guide clear of grit and report any chipped glass edge straight away.
- Listed interiors and heritage buildings in Ashford sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
Frameless glass automatic doors in Ashford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Ashford.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For an all-glass entrance in Ashford that is measured, fitted and set up properly, contact us and book your free site survey.
Frameless glass automatic doors in Ashford: questions
Can a frameless door in Ashford be connected to our access control?
Yes. The operator can be linked to card readers, fob readers, keypads, intercoms or a timer, so the door opens freely in working hours and only for authorised people at other times. Tell us what you already have at the survey and the quote will set out the interface work.
Is there a guide price for frameless glass automatic doors in Ashford?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Ashford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What should we do if the frameless door in Ashford is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
How long does fitting take in Ashford?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
What does the free site survey in Ashford involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for frameless glass automatic doors, with drawings where the door type needs them.
What happens once the installation in Ashford is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Ashford?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.