Covering Edmonton and nearby
We cover the whole of the N9 and N18 postcode districts, along with nearby towns in Greater London. You book each visit for frameless glass automatic doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Frontages in Edmonton can be narrow, and many London streets include listed buildings or conservation areas where changes to a shopfront need consent. Slimline operators and folding doors are often the practical options, as is a discreet operator fitted to the existing door.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Tottenham (1.6 miles), Enfield (2.1 miles), Chingford (2.5 miles), Walthamstow (2.9 miles), Wood Green (3.1 miles), Waltham Abbey (4.8 miles).
What to think about for frameless glass automatic doors in Edmonton
- Showrooms in Edmonton with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Listed interiors and heritage buildings in Edmonton sometimes favour frameless glass because it hides less of the original fabric. Consent may still be needed, so check with the planning authority early.
- The header needs a rigid fixing. In modern offices in Edmonton with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
- Laminated glass is worth considering for ground-floor doors. It stays in place if broken, which keeps the building secure until a replacement leaf can be made.
- Every edge and fitting on a frameless door is visible. Choose a top rail and clamp finish, such as satin stainless or black, that suits the rest of the ironmongery in the building.
Frameless glass automatic doors in Edmonton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Edmonton.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free survey in Edmonton and get honest advice on whether a frameless door suits your entrance, plus a fixed written quote.
Frameless glass automatic doors in Edmonton: questions
Do you fit frameless glass automatic doors in Edmonton?
Yes. We arrange supply and installation in Edmonton and throughout Greater London, with specialist automatic door engineers working under our management carrying out the survey and fitting. We are the contracting party, so one company is responsible for the glass, the operator, the installation and the paperwork at handover.
Can you give me a price for frameless glass automatic doors in Edmonton?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Edmonton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a frameless door in Edmonton match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
Is the survey for a frameless door in Edmonton free?
Yes. For a new frameless automatic door, the survey is free and you are under no obligation. The engineer measures the opening, checks the structure above and the floor below, discusses glass and fittings, and you then receive a drawing and a fixed, itemised written quote.
What happens to the old door when a new one is fitted in Edmonton?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Can installation in Edmonton happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Which building regulations apply to a new automatic entrance in Edmonton?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.