Covering Gloucester and nearby
Engineers working under our management travel to addresses across the GL1, GL2 and GL4 postcode districts for frameless glass automatic doors. There is no depot or showroom in Gloucester; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Supermarkets and larger stores in and around Gloucester often trade long hours, so work on their entrances is usually planned for early mornings or late evenings. Where a store has more than one entrance, keeping one in use while the other is worked on is part of the plan.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Cheltenham (7.4 miles), Stroud (8.2 miles), Tewkesbury (9.4 miles), Ross-on-Wye (14.2 miles), Cirencester (15.4 miles), Malvern (17.3 miles).
What to think about for frameless glass automatic doors in Gloucester
- Glass partitions in office buildings across Gloucestershire are often supplied by a fit-out contractor. Share their drawings with us so the door glass, gaps and finishes match the rest of the screens.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
- Street-facing doors in Gloucester that take the full force of wind and rain may be better as framed sliding doors. Frameless leaves have small gaps that let draughts and noise through.
- Every edge and fitting on a frameless door is visible. Choose a top rail and clamp finish, such as satin stainless or black, that suits the rest of the ironmongery in the building.
- Showrooms in Gloucester with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
Frameless glass automatic doors in Gloucester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Gloucester.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Send us the opening size and a photo of the space in Gloucester, and we will arrange a free survey for a frameless glass automatic door.
Frameless glass automatic doors in Gloucester: questions
Will a frameless door suit our street entrance in Gloucester?
It depends on exposure. Sheltered entrances, recessed doorways and doors behind a canopy usually suit frameless glass well. A door facing straight onto a windy street may suffer from draughts and noise. We will give you an honest view at the survey and, where needed, suggest a framed door or a frameless inner door in a lobby.
What is the guide price for frameless glass automatic doors in Gloucester?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Gloucester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need building approval for a frameless door in Gloucester?
Replacing a door like for like does not always need approval, but new entrances and wider building work can. Building regulations guidance on access to buildings applies to new buildings and to building work on existing ones, and the details differ in each UK nation. Your local building control or building standards service can confirm what applies.
How long does fitting take in Gloucester?
Most frameless automatic doors take a day on site once the glass has been made, which is typically 4 to 8 weeks from order. Work in occupied offices can be planned for quieter times, early mornings or weekends, and any extra cost for out-of-hours work is shown separately in the quote.
What is the lead time for frameless glass automatic doors in Gloucester?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Gloucester is agreed before work starts.
Who is responsible for automatic doors on escape routes in Gloucester?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.