Covering Colchester and nearby
Sites across the CO1, CO2, CO3 and CO4 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Colchester for frameless glass automatic doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Town-centre buildings in Colchester range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for frameless glass automatic doors (straight-line distance): Sudbury (12.7 miles), Clacton-on-Sea (12.8 miles), Witham (12.8 miles), Maldon (14.7 miles), Braintree (15.0 miles), Walton-on-the-Naze (15.8 miles).
What to think about for frameless glass automatic doors in Colchester
- Hotels and restaurants in Colchester often want the door to stay open on warm days and close in bad weather. A programme switch with hold-open and automatic modes makes that a simple daily choice.
- The header needs a rigid fixing. In modern offices in Colchester with suspended ceilings, the operator is usually fixed to the slab above with a steel support, which the survey designs in from the start.
- Power has to reach the operator above the door. In glass partitions there may be nowhere to hide a cable, so plan the route through the ceiling or a slim trunking from the start.
- Showrooms in Colchester with large displays, or vehicles moving in and out, may want a wide bi-parting frameless door with a hold-open mode for deliveries.
- Floor guides need a sound floor. Where the entrance has stone, tiles or polished concrete, agree whether a channel will be cut or a small surface guide fixed, and who makes good the finish.
Frameless glass automatic doors in Colchester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide frameless glass door | £5,495 – £8,995 | installed, ex VAT |
| Bi-parting frameless glass door, about 2 m clear opening | £7,495 – £12,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is frameless glass automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Colchester.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Book a free survey in Colchester and get honest advice on whether a frameless door suits your entrance, plus a fixed written quote.
Frameless glass automatic doors in Colchester: questions
What should we do if the frameless door in Colchester is damaged?
If the glass is chipped or cracked, switch the door off, keep people away from the damaged leaf and contact us. A repair or replacement visit is priced in writing before an engineer attends, and replacement glass is quoted before it is ordered. Laminated glass usually stays in place until it can be replaced.
What do you charge for frameless glass automatic doors in Colchester?
Our guide starts from £5,495 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Colchester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a frameless door suit our street entrance in Colchester?
It depends on exposure. Sheltered entrances, recessed doorways and doors behind a canopy usually suit frameless glass well. A door facing straight onto a windy street may suffer from draughts and noise. We will give you an honest view at the survey and, where needed, suggest a framed door or a frameless inner door in a lobby.
Can a frameless door in Colchester match our existing glass partitions?
Usually, yes. We can match glass type and thickness, gap sizes and fitting finishes to the partition, working from the fit-out drawings where you have them. The survey checks the partition head and tolerances, so the new door sits in line with the existing glass and the operator is fixed to something solid above.
How much disruption should we expect while the work is done in Colchester?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What happens once the installation in Colchester is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Colchester?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.