Covering Stoke-on-Trent and nearby
Requests for fire door hold-open devices in Stoke-on-Trent are handled by us and passed to a specialist engineer working under our management. Coverage includes the ST1, ST2, ST3, ST4 and ST6 postcode districts: town-centre premises, business and retail sites, public buildings and residential streets alike.
Out-of-hours work is common in a city, where retail entrances may only be available before opening and office lobbies at weekends. Work in Stoke-on-Trent can be arranged early in the morning, in the evening or at weekends where the building needs it, with any extra cost shown in the written price.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Newcastle-under-Lyme (2.0 miles), Kidsgrove (6.1 miles), Biddulph (7.8 miles), Leek (9.7 miles), Congleton (11.0 miles), Sandbach (12.2 miles).
What to think about for fire door hold-open devices in Stoke-on-Trent
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
- Older buildings in Stoke-on-Trent may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
- Hard-wired magnets need a power supply near each door. In buildings in Stoke-on-Trent where that is awkward, battery units avoid running new cables along finished corridors.
- Think about who tests the fire alarm each week at your building in Stoke-on-Trent. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
Fire door hold-open devices in Stoke-on-Trent: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Stoke-on-Trent and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send us a list of the doors you want held open at your building in Stoke-on-Trent, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.
Fire door hold-open devices in Stoke-on-Trent: questions
Are battery hold-open units a good choice for older buildings in Stoke-on-Trent?
Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.
Is there a guide price for fire door hold-open devices in Stoke-on-Trent?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Stoke-on-Trent confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you work with the fire alarm company that maintains our system in Stoke-on-Trent?
Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.
Will you test the hold-open devices before leaving our site in Stoke-on-Trent?
Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.
How much disruption should we expect while the work is done in Stoke-on-Trent?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
How do you make sure the door works for disabled visitors in Stoke-on-Trent?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Who is responsible for automatic doors on escape routes in Stoke-on-Trent?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.