UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · South Glamorgan

Fire door hold-open devices in Penarth

If residents or staff in Penarth struggle with heavy self-closing doors, a free-swing closer or an alarm-linked magnet can make them easy to use without weakening fire protection. Book a free survey and we will list the right device for every door.

Town
Penarth
Area
South Glamorgan
Postcodes
CF64
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Penarth and nearby

Addresses anywhere in the CF64 postcode district can book fire door hold-open devices through us. The engineer who attends works under our management and travels to the site. There is no branch in Penarth, so the price, the booking and the paperwork all come from one place.

Independent businesses in Penarth often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Cardiff (2.9 miles), Barry (5.5 miles), Caerphilly (9.6 miles), Risca (12.1 miles), Newport (12.8 miles), Pontypridd (13.4 miles).

What to think about for fire door hold-open devices in Penarth

  • Hard-wired magnets need a power supply near each door. In buildings in Penarth where that is awkward, battery units avoid running new cables along finished corridors.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Schools and colleges in Penarth may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
  • Think about who tests the fire alarm each week at your building in Penarth. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
  • Older buildings in Penarth may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.

Fire door hold-open devices in Penarth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in Wales

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for fire door hold-open devices and book a survey in Penarth.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Send us a list of the doors you want held open at your building in Penarth, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.

Fire door hold-open devices in Penarth: questions

What will the survey in Penarth look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

What will fire door hold-open devices in Penarth cost?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Penarth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Which doors in my building in Penarth can be held open?

That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.

How soon can hold-open devices be fitted in Penarth?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

What do you need from us for parking and access in Penarth?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

What should I send before the survey in Penarth?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for fire door hold-open devices together more easily.

Are the rules for automatic doors different in Wales?

Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.

Next step

Fire door hold-open devices in Penarth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.