UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Renfrewshire and Inverclyde

Fire door hold-open devices in Port Glasgow

Hold-open devices let fire doors stay open in normal use and close as soon as the alarm sounds. For buildings in Port Glasgow we supply and fit wired magnets, free-swing closers and radio or acoustic units, working with your alarm engineer where a panel connection is needed.

Town
Port Glasgow
Area
Renfrewshire and Inverclyde
Postcodes
PA14
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Port Glasgow and nearby

Sites across the PA14 postcode district are visited by specialist automatic door engineers working under our management. They travel to Port Glasgow for fire door hold-open devices as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.

Parking on a busy high street can be tight. When work is booked in Port Glasgow, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Greenock (2.9 miles), Gourock (5.3 miles).

What to think about for fire door hold-open devices in Port Glasgow

  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Older buildings in Port Glasgow may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
  • Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
  • Hard-wired magnets need a power supply near each door. In buildings in Port Glasgow where that is awkward, battery units avoid running new cables along finished corridors.
  • Schools and colleges in Port Glasgow may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.

Fire door hold-open devices in Port Glasgow: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in Scotland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Port Glasgow, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Ready to stop wedging fire doors open in Port Glasgow? Book a free survey and get a fixed, itemised quote for every door that needs a hold-open device.

Fire door hold-open devices in Port Glasgow: questions

What will the survey in Port Glasgow look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

What price range should I expect for fire door hold-open devices in Port Glasgow?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Port Glasgow confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How soon can hold-open devices be fitted in Port Glasgow?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

Can you work with the fire alarm company that maintains our system in Port Glasgow?

Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.

How much disruption should we expect while the work is done in Port Glasgow?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

Can automatic doors be fitted to a listed building in Port Glasgow?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Is a building warrant needed for a new automatic entrance in Port Glasgow?

Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.

Next step

Fire door hold-open devices in Port Glasgow

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.