Covering Banbury and nearby
We cover the whole of the OX16 postcode district, along with nearby towns in Oxfordshire. You book each visit for fire door hold-open devices directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Small offices, community centres and village halls around Banbury tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Bicester (13.8 miles), Daventry (15.4 miles), Leamington Spa (17.1 miles), Stratford-upon-Avon (17.9 miles), Warwick (18.3 miles), Witney (20.3 miles).
What to think about for fire door hold-open devices in Banbury
- Think about who tests the fire alarm each week at your building in Banbury. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
- Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
- Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
- Schools and colleges in Banbury may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
- Care homes in Banbury usually want bedroom doors that residents can open easily. Free-swing closers suit this, provided the evacuation strategy for the home supports them.
Fire door hold-open devices in Banbury: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Banbury.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Arrange your free hold-open device survey in Banbury today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.
Fire door hold-open devices in Banbury: questions
Do care homes in Banbury use free-swing closers?
Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.
What will fire door hold-open devices in Banbury cost?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Banbury confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Which doors in my building in Banbury can be held open?
That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.
Do you fit fire door hold-open devices in Banbury?
Yes. We arrange surveys and installations in Banbury through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
What happens to the old door when a new one is fitted in Banbury?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What should I send before the survey in Banbury?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for fire door hold-open devices together more easily.
Which building regulations apply to a new automatic entrance in Banbury?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.