Covering Kirkby-in-Ashfield and nearby
For fire door hold-open devices, coverage around Kirkby-in-Ashfield is set by postcode and includes the NG17 postcode district, as well as nearby addresses in Nottinghamshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Doors at quieter sites in Kirkby-in-Ashfield and elsewhere in Nottinghamshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Sutton-in-Ashfield (1.9 miles), Mansfield (2.9 miles), Hucknall (4.9 miles), Mansfield Woodhouse (5.0 miles), Alfreton (5.8 miles), Eastwood (7.3 miles).
What to think about for fire door hold-open devices in Kirkby-in-Ashfield
- Think about who tests the fire alarm each week at your building in Kirkby-in-Ashfield. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
- Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
- Hard-wired magnets need a power supply near each door. In buildings in Kirkby-in-Ashfield where that is awkward, battery units avoid running new cables along finished corridors.
- Older buildings in Kirkby-in-Ashfield may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
- Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
Fire door hold-open devices in Kirkby-in-Ashfield: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Kirkby-in-Ashfield.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Arrange your free hold-open device survey in Kirkby-in-Ashfield today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.
Fire door hold-open devices in Kirkby-in-Ashfield: questions
Do you fit fire door hold-open devices in Kirkby-in-Ashfield?
Yes. We arrange surveys and installations in Kirkby-in-Ashfield through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
What will fire door hold-open devices in Kirkby-in-Ashfield cost?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Kirkby-in-Ashfield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Are battery hold-open units a good choice for older buildings in Kirkby-in-Ashfield?
Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.
Will you test the hold-open devices before leaving our site in Kirkby-in-Ashfield?
Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.
How are payments structured for work in Kirkby-in-Ashfield?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Kirkby-in-Ashfield is agreed before work starts.
Who is responsible for automatic doors on escape routes in Kirkby-in-Ashfield?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.