UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Lancashire

Fire door hold-open devices in Rawtenstall

Hold-open devices let fire doors stay open in normal use and close as soon as the alarm sounds. For buildings in Rawtenstall we supply and fit wired magnets, free-swing closers and radio or acoustic units, working with your alarm engineer where a panel connection is needed.

Town
Rawtenstall
Area
Lancashire
Postcodes
BB4
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Rawtenstall and nearby

Coverage for fire door hold-open devices runs across the BB4 postcode district and out into the surrounding parts of Lancashire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Independent businesses in Rawtenstall often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Ramsbottom (3.9 miles), Accrington (4.8 miles), Bury (7.0 miles), Burnley (7.2 miles), Darwen (7.4 miles), Rochdale (7.8 miles).

What to think about for fire door hold-open devices in Rawtenstall

  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
  • Care homes in Rawtenstall usually want bedroom doors that residents can open easily. Free-swing closers suit this, provided the evacuation strategy for the home supports them.
  • Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Older buildings in Rawtenstall may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.

Fire door hold-open devices in Rawtenstall: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Rawtenstall.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Tell us about the fire doors that cause problems in Rawtenstall. We will survey them free of charge and explain which hold-open options your alarm can support.

Fire door hold-open devices in Rawtenstall: questions

How soon can hold-open devices be fitted in Rawtenstall?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

What will fire door hold-open devices in Rawtenstall cost?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Rawtenstall confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you work with the fire alarm company that maintains our system in Rawtenstall?

Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.

What will the survey in Rawtenstall look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

What do you need from us for parking and access in Rawtenstall?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

What does the written quote for fire door hold-open devices in Rawtenstall include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Do businesses in Rawtenstall have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Fire door hold-open devices in Rawtenstall

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.