Covering Sittingbourne and nearby
Homes, businesses and public buildings throughout the ME10 postcode district can arrange fire door hold-open devices with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Sittingbourne for the job rather than working from premises in town.
Weather matters for entrances that face open car parks, which is common on retail and business parks around Sittingbourne and elsewhere in Kent. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Faversham (7.0 miles), Gillingham (8.6 miles), Chatham (9.2 miles), Rochester (10.3 miles), Maidstone (10.7 miles), Strood (11.6 miles).
What to think about for fire door hold-open devices in Sittingbourne
- Older buildings in Sittingbourne may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
- Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
- Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
- Hard-wired magnets need a power supply near each door. In buildings in Sittingbourne where that is awkward, battery units avoid running new cables along finished corridors.
- Schools and colleges in Sittingbourne may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
Fire door hold-open devices in Sittingbourne: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for fire door hold-open devices and book a survey in Sittingbourne.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us a list of the doors you want held open at your building in Sittingbourne, plus any notes from your fire risk assessment, and we will arrange a survey at no cost.
Fire door hold-open devices in Sittingbourne: questions
Which doors in my building in Sittingbourne can be held open?
That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.
What will fire door hold-open devices in Sittingbourne cost?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Sittingbourne confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What will the survey in Sittingbourne look at?
The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.
Do you fit fire door hold-open devices in Sittingbourne?
Yes. We arrange surveys and installations in Sittingbourne through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
What power supply is needed for fire door hold-open devices in Sittingbourne?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
How do you make sure the door works for disabled visitors in Sittingbourne?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Who is responsible for automatic doors on escape routes in Sittingbourne?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.