Covering Ashton-under-Lyne and nearby
Our coverage of Ashton-under-Lyne takes in the OL6 and OL7 postcode districts and the neighbouring parts of Greater Manchester. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about fire door hold-open devices and we will confirm the arrangements and the price in writing.
Independent businesses in Ashton-under-Lyne often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Dukinfield (1.1 miles), Stalybridge (1.7 miles), Droylsden (2.0 miles), Denton (2.3 miles), Hyde (2.7 miles), Failsworth (3.0 miles).
What to think about for fire door hold-open devices in Ashton-under-Lyne
- Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
- Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
- Think about who tests the fire alarm each week at your building in Ashton-under-Lyne. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
Fire door hold-open devices in Ashton-under-Lyne: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Ashton-under-Lyne and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Arrange your free hold-open device survey in Ashton-under-Lyne today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.
Fire door hold-open devices in Ashton-under-Lyne: questions
Can you work with the fire alarm company that maintains our system in Ashton-under-Lyne?
Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.
What do you charge for fire door hold-open devices in Ashton-under-Lyne?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Ashton-under-Lyne confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you test the hold-open devices before leaving our site in Ashton-under-Lyne?
Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.
Which doors in my building in Ashton-under-Lyne can be held open?
That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.
What should I send before the survey in Ashton-under-Lyne?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for fire door hold-open devices together more easily.
How are payments structured for work in Ashton-under-Lyne?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Which building regulations apply to a new automatic entrance in Ashton-under-Lyne?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.